Table of Contents
Advertisement
User can set a value in the range of 4 to 255.
WatchDog Timer Unit
The optional settings are: [Second];[Minute].
► Shutdown Temperature Configuration
Use this item to select system shutdown temperature.
The optional settings are: [Disabled]; [70C/150F]; [75C/167F]; [80C/176F];
[85C/185F];
► CPU PPM Configuration
Press [Enter] to make settings for CPU PPM Configuration:
CPU PPM Configuration:
EIST
The optional settings: [Enabled]; [Disabled].
Use this item to enable or disable Intel SpeedStep.
CPU C3 Report
The optional settings: [Enabled]; [Disabled].
Use this item to enable or disable CPU C3 (ACPI C2) report to OS.
CPU C6 Report
The optional settings: [Enabled]; [Disabled].
Use this item to enable or disable CPU C6 (ACPI C3) report to OS.
CPU C7 Report
The optional settings: [Enabled]; [Disabled].
Use this item to enable or disable CPU C7 (ACPI C3) report to OS.
► SmartFan Configuration
Press [Enter] to make settings for SmartFan Configuration:
SmartFan Configuration:
CPUFAN 3/4 Pin Fan Select/ SYSFAN1 3/4 Pin Fan Select / SYSFAN2 3/4 Pin
Fan Select
The optional settings are: [3 Pin];[4 Pin].
CPUFAN / SYSFAN1/ SYSFAN2 Smart Mode
When set as [Enabled], the following sub-items shall appear:
CPUFAN / SYSFAN1/ SYSFAN2 Full Speed Temperature
Use this item to set CPUFAN/SYSFAN1/SYSFAN2 full speed temp. Fan will run at
26
Advertisement
Table of Contents
