Measuring The Total Card Area - Fargo HDP600-LC CR100 User Manual

RESTRICTED USE ONLY

Measuring the Total Card area

Step Procedure
1 Determine the area of the card to define. (Note: This area is indicated by the
dashed outline, as shown below. The easiest way to determine the size of
this area is to actually print a card and look at it in the same orientation as
when it exits the Printer.)
2 Measure the total area and enter those dimensions into the dimension boxes.
(Note: The minimum size an area can be is .2 x .2 (5mm x 5mm).)
HDP600 High Definition Card Printer/Encoder User Guide (Rev. 2.5)
Fargo Electronics, Inc.
7-55