Replacing The Peel-Off Sensor - Toshiba B-EP2DL Series Maintenance Manual

2. MAJOR UNIT REPLACEMENT
2.4

Replacing the Peel-off Sensor

1) Remove the Right Cover, Left Cover and Front Cover. (Refer to Section 2.1 Replacing the CPU PC
Board.)
2) Disconnect the Connector from the CPU PC Board.
3) Pull out the Cover Shaft, then remove the Peel-off Sensor Unit.
Connector
Cover Shaft
NOTE: Apply Floil to the Peel-off Sensor Unit as shown below when replacing the unit.
4) Release the Peel-off Sensor Cover from the Hooks.
Peel-off Sensor Unit
Hook
CPU PC Board
FLOIL
Hook
2-10
(Revision Date: Mar. 17, 2009)
2.4 Replacing the Peel-off Sensor
Peel-off Sensor Unit
Peel-off Sensor Unit
Peel-off Sensor Cover
EO18-33024