Replacing The Battery Terminal - Toshiba B-FP2D Series Maintenance Manual

2. MAJOR UNIT REPLACEMENT

2.14 Replacing the Battery Terminal

1) Continue from Section 2.13 Removing the Motor Assembly
2) Turn the Unit upside down. Bend the two ground terminals so that it will fit the hole.
Ground Terminals
3) Carefully pull each terminal in order to detach.
4) Replace the Battery Terminal with a new one, then perform reassembly in the reverse order of removal
Push inside the hole
Battery Terminal
2-18
SPTM-0282
2.13 Replacing the Wireless Charger