Replacing The Peel-Off Sensor - Toshiba B-EP4DL Series Maintenance Manual

2. MAJOR UNIT REPLACEMENT
2.4

Replacing the Peel-off Sensor

1) Remove the Right Cover, Left Cover and Front Cover. (Refer to Section 2.1 Replacing the CPU PC
Board.)
2) Disconnect the Connector from the CPU PC Board.
3) Pull out the Cover Shaft, then remove the Peel-off Sensor Unit.
Connector
Cover Shaft
4) Release the Peel-off Sensor Cover from the Hooks.
5) Remove the Peel-off Sensor.
CPU PC Board
Peel-off Sensor Unit
Hook
Peel-off Sensor
Hook
2-10
2.4 Replacing the Peel-off Sensor
Peel Off Sensor Unit
Peel-off Sensor Cover
EO18-33023