Replacing The Driver Card - Toshiba B-FP2D Series Maintenance Manual

2. MAJOR UNIT REPLACEMENT

2.12 Replacing the Driver card

1) Continue from Section 2.11 Removing the Thermal Head Assembly.
2) Remove the White FFC Cable from the Driver Card. To do this, get a tweezer or a similar tool to unlock the
connector from both sides.
NOTE:
1. For this type of connector, you must first push the side locks downward to unlock in order for the flex to
be removed.
3) Remove the two screws holding the Driver card and detach the two connectors one by one.
Disconnect
4) Replace the Driver Card with a new one, then perform reassembly in the reverse order of removal.
FFC Cable
Disconnect
2-16
SPTM-0325
2.12 Replacing the Driver Card
Push
Driver card