Rack Mounting The Dvi Da6 Plus And Dvi Da8 Plus - Extron electronics Distribution Amplifiers DVI DA4 Plus User Manual

Installation and Operation, cont'd

Rack mounting the DVI DA6 Plus and DVI DA8 Plus

The DVI DA6 Plus and DVI DA8 Plus distribution amplifiers
can be mounted using the Extron MBD 149 rack mount kit
(provided) as follows:
1.
2.
Bracket mounting screws
Rack mounting the DVI DA6 Plus or DVI DA8 Plus
3. Align the holes in the mounting brackets with holes in the
rack and secure the unit with brackets to the rack using the
four rack-mounting screws and four washers provided with
the mounting kit.
DVI DA Plus Series • Installation and Operation
2-4
Remove rubber feet if these have been installed on the
bottom of the unit.
Secure one bracket to each side of the distribution amplifier
with the provided bracket mounting screws (four #8 screws
for each bracket — see the figure below).
MBD 149 Bracket
FRONT
Rack mounting screws