Rear Panel Features - Extron electronics Distribution Amplifiers DVI DA4 Plus User Manual

Rear Panel Features

The rear panels for the DVI DA4 Plus (top panel), the DVI DA6
Plus (middle panel), and DVI DA8 Plus (bottom panel) are
shown below:
POWER DVI-D INPUT
12V
1.0A MAX
2
POWER
12V
1.5A MAX
2
POWER
12V
1.5A MAX
Rear panel features
b
Power input — Connect the external power supply (provided)
to the 3.5 mm, 2-pole captive screw power receptacle.
c
Input connector — Connect the input signal to the female DVI-I
connector. The DVI input signal is equalized to ensure integrity.
d
Output Connectors — Connect up to four (DVI DA4 Plus),
six (DVI DA6 Plus) or eight (DVI DA8 Plus) DVI-D outputs to
display devices, using the female DVI-I connectors.
N
N
DVI DA Plus Series • Installation and Operation
DVI-D OUTPUT
1 2
3 4
DVI-D INPUT
1
3
DVI-D INPUT
1
Although these distribution amplifiers have DVI-I
connectors, they are only compatible with single-link
DVI-D video signals.
The DVI DA Plus series distribution amplifiers are not
HDCP compliant.
DVI DA4 Plus
3 4
DVI-D OUTPUT
2 3 4
4
DVI-D OUTPUT
2 3 4
5 6
5 6 7
DVI DA6 Plus
DVI DA8 Plus
8
2-7