Dvi Da Plus Series Features - Extron electronics Distribution Amplifiers DVI DA4 Plus User Manual

DVI DA Plus Series Features

EDID Minder —
(Extended Display Identification Data) communication with
the attached source. This ensures that the DVI source powers
up correctly and maintains a proper video output, even if the
display is off.
High Resolution DVI-D input —
accept one single link DVI-D input, with a resolution range up
to 1920 x 1200 or 1080p @ 60 Hz.
Input Equalization — Input Equalization (EQ) conditions the
input signals to ensure the integrity of the signals delivered to
the output devices.
DVI-D outputs —
six (DVI DA6 Plus), or eight (DVI DA8 Plus) single link DVI-D
output signals simultaneously, at resolutions up to 1920 x 1200
or 1080p @ 60 Hz.
N
External power supply — All three models are powered by
external 12 VDC power supply (provided with the units).
Power on Pin 14 — The distribution amplifiers are able to
provide a 5 VDC (250 mA) output.
Front Panel Indicator LED — The LED light on the front panel
provides feedback about power status and whether an input
signal is detected.
Versatile mounting options — All three units can be mounted
in a rack, under a desk or set on a tabletop.
The EDID Minder maintains continuous EDID
The units distribute four (DVI DA4 Plus),
The actual signal transmission distance can vary greatly
and depends on signal resolution, cable type, cable
quality, graphics card and the display used in the system.
DVI DA Plus Series • Introduction
The distribution amplifiers
1-3