Input Cable Connections; Output Cable Connections - Extron electronics Distribution Amplifiers DVI DA4 Plus User Manual

Input cable connections

Connect a single link DVI-D source device, with a resolution
range up to 1920 x1200 or 1080p @ 60 Hz, to the female DVI-I
input, using a DVI cable.
N
Input EQ conditions input signals to ensure the integrity of the
signals delivered to the output devices.

Output cable connections

Use DVI-I cables to connect up to four (DVI DA4 Plus),
six (DVI DA6 Plus) or eight (DVI DA8 Plus) display devices.
N
DVI DA Plus Series • Installation and Operation
Although these distribution amplifiers have DVI-I
connectors, they are only compatible with single-link
DVI-D video signals.
The actual signal transmission distance can vary and
depends on signal resolution, cable quality, graphics
card, and display used in the system.
2-9