Power Supply Input - Extron electronics Distribution Amplifiers DVI DA4 Plus User Manual

Installation and Operation, cont'd

Power supply input

Connect the two pole, 3.5 mm captive screw connector from the
power supply (provided with the unit) to this orange socket on
the rear panel.
POWER
12V
1.0A MAX
The external power supply in the illustration above (12 VDC,
2A) is for use with the DVI DA4 Plus. The DVI DA6 Plus and
DVI DA8 Plus use a 12 VDC, 3A external power supply.
DVI DA Plus Series • Installation and Operation
2-8
Back Panel
Power Receptacle
DC Power Cord
Captive Screw Connector
Ground
+12 VDC
AC Power Cord
External
Power Supply
(12 VDC, 2 A )