PREVOST H3-41 Manual page 103

MAIN SUB
CODE CODE
23 14 Secondary Shift Selector
or RSI Link Fault
23 15 Secondary Shift Selector
Mode Function Fault
24 12 Sump oil temperature, cold
24 23 Sump oil temperature, hot
25 0 Output speed reasonableness
test, detected at 0 speed, (L)
25 11 Output speed reasonableness
test, detected at 0 speed, (1st)
25 22 Output speed reasonableness
test, detected at 0 speed 2nd
25 33 Output speed reasonableness
test, detected at 0 speed, 3rd
25 44 Output speed reasonableness
test, detected at 0 speed, 4th
25 55 Output speed reasonableness
test, detected at 0 speed, 5th
25 66 Output speed reasonableness
test, detected at 0 speed, 6th
25 77 Output speed reasonableness
test, detected at 0 speed, R
32 0 C3 pressure switch open,
L range
32 33 C3 pressure switch open,
3rd range
32 55 C3 pressure switch open,
5th range
32 77 C3 pressure switch open,
R range
33 12 Sump oil temperature
sensor, low
33 23 Sump oil temperature
sensor, high
34 12 EEPROM, factory cal.
compatibility number wrong
34 13 EEPROM, factory
calibration block checksum
DESCRIPTION
8-13
TECHNICAL INFORMATION
CHECK INHIBITED
TRANS
OPERATION
LIGHT
DESCRIPTION
No Hold in last valid direction
No Mode change not
permitted
Yes CT
No No upshifts above a
calibration range
Yes CT, Lock in current
range (L)
Yes CT, Lock in current
range (1 st)
Yes CT, Lock in current
range (2nd)
Yes CT, Lock in current
range (3rd)
Yes CT, Lock in current
range (4th)
Yes CT, Lock in current
range (5th)
Yes CT, Lock in current
range (6th)
Yes CT, Lock in current
range (R)
Yes CT, Lock in current
range (L)
Yes CT, Lock in current
range (3rd)
Yes CT, Lock in current
range (5th)
Yes CT, Lock in current
range (R)
No Use default value of
200ø F (93ø C)
No Use default value of
200ø F (93ø C)
Yes CT, SOL OFF
(Hydraulic default)
Yes CT, SOL OFF
(Hydraulic default)