Driver's Power Window Switch; Mirror Controls; Tag Axle Control Valve - PREVOST H3-41 Manual

CONTROLS & INSTRUMENTS
Note :
The cruise control and RESUME
switch do not operate at speeds below 20 mph
(32 km/h).
Increasing Set Speed
The coach cruise speed setting can be
increased by one of the following methods:
a) With the accelerator pedal and the SET
switch
Accelerate the coach using the accelerator
pedal until the desired cruising speed is
reached; then depress and release the SET
switch.
Note :
When driving with cruise control, the
coach can still be accelerated by depressing the
accelerator pedal in the usual manner. Once
the accelerator pedal is released, the coach will
return to the previously set cruising speed.
b) With RESUME switch
Depress and hold the RESUME switch until the
desired cruising speed is reached. When the
RESUME switch is released, the new cruising
speed will be stored in the cruise control
memory. The RESUME switch does not operate
at speeds below 20 mph (32 km/h).
Decreasing Set Speed
The coach cruise speed setting can be
decreased by one of the following methods:
a) With the SET switch
Depress and hold the SET switch until the
desired cruising speed is reached. When the
SET switch is released, the new cruising speed
will be stored in the cruise control memory.
b) With the DECEL switch
The cruise control can be disengaged without
losing the preset cruise speed by either of the
following methods:
• Slightly apply the service brake, or;
• Depress and release the DECEL switch.
Note :
For coaches equipped with a manual
transmission, the cruise
disengaged by depressing the clutch pedal, and
re-engaged by releasing the clutch pedal.
After disengaging the cruise control, you can
return to the preset cruising speed by pressing
control may be
3-4
and releasing the RESUME switch providing
that the coach's speed is above 20 mph (32
km/h).
Note :
To avoid sudden coach hesitation,
depress the accelerator pedal lightly before
disengaging the cruise control.
Note :
When the CRUISE rocker switch is
turned off, the cruise control is completely shut-
off and the cruise speed setting is cleared from
the cruise control memory.

Driver's Power Window Switch

Use the rocker switch to open or close the
driver's power window.

Mirror Controls

MIRROR CONTROLS
Turn left pointer knob counterclockwise for
outside mirror head adjustments and to the right
for convex mirror adjustments, then use the
joystick control to adjust the selected mirror's
viewing angle. Adjust the right outside mirror
similarly but by using the right side control.
Note :
If the mirror assemblies on your vehicle
do not include convex mirrors, only one (1)
Mirror Control will be installed for both mirrors.
To operate, turn pointer knob to the left for L.H.
mirror adjustments and to the right for R.H.
mirror adjustments, then use the joystick control
to adjust the selected mirror's viewing angle.

Tag Axle Control Valve

Unload (or raise) the TAG axle by pushing the
lever forward. Pulling the lever back will load (or
lower) the TAG axle. Refer to ''Other Features''
chapter (page 4-12) for additional information.