Driver's Seat - PREVOST H3-41 Manual

Hide thumbs Also See for H3-41:
Table of Contents

Advertisement

Immediately report problems with safety belts to
maintenance personnel.
Note :
The safety belt must be pulled out slowly
and steadily, otherwise the inertia reel will lock
before the latch plate reaches the buckle. If the
inertia reel locks, let the belt retract completely
before trying again.
Warning :
To prevent serious injury during
sudden braking or accidents, make sure the lap
belt is snug and positioned low on the hips. Make
sure the belt is not twisted. Check the belt and
belt hardware. It should be free of damage.
Report problems with safety belts to maintenance
personnel.
Warning : T
o avoid pinching fingers between
the retractor and control knobs, move safety belt
retractor before adjusting seat angle.
Caution :
Do not let the belt rub against edges.
Do not bleach or dry clean.
To unfasten the safety belt, press the red button
in the center of the buckle and allow the belt to
retract. If the belt does not retract, pull it out and
check for kinks or twists. Make sure that the belt
remains untwisted as it retracts.
UNFASTENING SAFETY BELT

Driver's Seat

The coach is equipped with a ISRI seat which is
offered in three models.
(model 6000) has mechanical suspension. The
optional models (models 6500 and 6801) are
equipped with air suspension. All seat models
come equipped with safety belts.
armrests and lumbar supports are also available.
OEH3B218
The standard model
Adjustable
2-3
Warning:
The driver's seat must be adjusted
within easy reach of controls. Never adjust the
seat while the coach is moving.
Warning
: Always wear safety belt. Make sure
the seat is adjusted and safety belt is fastened
before driving.
DRIVER'S SEAT ADJUSTMENT
OEH3B220
Driver's Seat Adjustment
ARMREST
The
driver's
equipped
armrests which can be raised or
lowered for convenience.
To adjust the armrest to a
different
control
knob (1) counterclockwise about 12 turns
without applying pressure on the armrest, push
the armrest to desired position. Lock in position
by turning the control knob clockwise.
Note :
Armrest may be raised at all times from
its locked position simply by pulling up.
COACH INTERIOR
(MECHANICAL)
seat
can
be
with
two
folding
position,
turn
the

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

H3-45

Table of Contents