Table of Contents
Advertisement
Quick Links
REVISION :
A
REFERENCE MANUAL CHANGED FOR GKN PARTS AND SERVICE MANUAL #1604
Important Notice:
This maintenance is recommended by Prévost Car to increase your vehicle's
performance. Note that no reimbursement will be awarded for carrying out this maintenance.
APPLICATION
Model
H3-41, H3-45 Coaches
Model Year: 1995 - 2000
DESCRIPTION
Two types of wheel hubs are available. One is lubricated with grease and the other is lubricated with oil.
Oil Lubricated Wheel Hubs are standard while grease lubricated wheel hubs are optional.
PROCEDURE
Warning :
Park vehicle safely, apply parking brake, stop engine and set battery master switch(es) to the
OFF position prior to working on the vehicle.
FRONT AND TAG AXLE WHEEL HUBS
Grease Lubricated Wheel Hubs
Front and tag axle wheel hubs and hub bearings need to be cleaned and greased every 50,000 miles (80
000 km) or once a year, whichever comes first.
1. Recommended Lubricants
A good quality lithium-base grease NLGI No. 1 or No. 2 is recommended.
2. Hub Bearing Inspection
An inspection should be made after the first 3,000 miles (4 800 km) and then at intervals of 25,000 miles
(40 000 km). When the wheels are raised, they should revolve quite freely without roughness.
MAINTENANCE
INFORMATION
DATE :
October 1999
SUBJECT :
VIN
From 2P9H33495S1001291 up to now.
Mi99-35A / Page 1/2
Mi99-35A
FRONT AND TAG AXLE
WHEEL HUBS LUBRICATION
SECTION : 13
Formulaire QF2150955
Rev:0
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for PREVOST Mi99-35A
Summary of Contents for PREVOST Mi99-35A
- Page 1 An inspection should be made after the first 3,000 miles (4 800 km) and then at intervals of 25,000 miles (40 000 km). When the wheels are raised, they should revolve quite freely without roughness. Mi99-35A / Page 1/2 Formulaire QF2150955...
- Page 2 Hub oil fill cap is provided with a very small vent hole in its center. Occasionally insert a small tip (toothpick size) to avoid hole restriction and prevent overpressure in bearing housing. FIGURE 2: OIL FILL CAP 13017 Mi99-35A / Page 2/2 Formulaire QF2150955 Rev:0...
Need help?
Do you have a question about the Mi99-35A and is the answer not in the manual?
Questions and answers