Follett 7 Series Installation Manual page 18

User Interface Display Identification
Operation Display
18
Dispenser and Ice Machine - 115 V, 230 V, 220 V
Condition
Normal
operation
Cleaning Mode Press and release maintenance/clean switch to
clean the user interface without dispensing ice or
water.
Drip tray full Empty drip tray.
Six-month Follow Maintenance Mode procedure (below).
periodic
maintenance
required
Maintenance Enter Maintenance Mode by pressing
Mode maintenance/clean switch until
Complete the cleaning and sanitizing procedure.
Exit Maintenance Mode by pressing and holding
maintenance/clean switch until
displays.
Service - Call Follett Technical Service Group at
8000 hr
(877) 612-5086 or +1 (610) 252-7301. The
bushing check
flashing wrench indicates that the 8000 hr
bushing check is required.
Internal leak in Locate leak and repair - Press reset on control
dispenser board. Contact Follett if icemaker is leaking.
Sleep mode Press either dispense button to return to normal
operation.
Procedure
—
displays.
no longer