Follett 7 Series Installation Manual page 13

Maintenance/Cleaning Mode
Cleaning Mode (Dispensing Disabled) - Use when cleaning surface
Entering Cleaning Mode disables the User Interface and allows you to clean
the outside of the dispenser without accidentally dispensing ice.
1. To enter Cleaning Mode, press and immediately release the
maintenance/clean switch (Fig. 11.1) so that only "ICE" displays in
the user interface (Fig. 11.2).
2. To exit Cleaning Mode, press and immediately release the
maintenance/clean switch so that the ice icon also displays in the
user interface.
Maintenance Mode (All Operations Disabled) - Use when cleaning
ice machine
Entering Maintenance Mode disables all operations and allows you to safely
clean and/or sanitize the ice machine and dispenser.
1. To enter Maintenance Mode, press and hold the maintenance/
clean switch (Fig. 11.3) until
(Fig. 11.4).
2. To exit Maintenance Mode, press and hold the maintenance/clean
switch until
Note: Entering and exiting Maintenance Mode will reset the six-month
periodic maintenance reminder.
Accessing Internal Components
CAUTION!
Except for routine cleaning and sanitizing, only qualified
technicians should attempt to service or maintain this equipment.
1. Press and hold the maintenance/clean switch (Fig. 11.1) until
displays in the user interface (Fig. 11.2).
2. Remove (unscrew) chrome ice dispenser chute (Fig. 12.1).
3. Remove the drip tray (Fig. 12.2).
4. Remove the two screws (Fig. 12.3) on the front panel (behind the
drip tray).
5. Remove and set aside the front panel (Fig. 12.4). Do not
disengage the plug on the back of the User Interface.
displays in the user interface
no longer displays in the user interface.
Fig. 11
Fig. 12
2
4
Dispenser and Ice Machine - 115 V, 230 V, 220 V
2
1
4
3
1
3
13