Installing The Cooking Components; Mounting The Control Knobs, Installing The Ignition Battery; Securing The Regulator Hose; Placing The Grease Bucket - Pit Boss Mile Hybrid Assembly & Operation

11. INSTALLING THE COOKING COMPONENTS

Parts Required:
1 x Upper Cooking Rack (#1)
2 x Cooking Grids (#2)
Installation:
• Place the Cooking Grids, side-by-side, on the grid ledge inside the
Main Barrel. Place the Upper Cooking Rack on the upper ledge inside
the Main Barrel.
NOTE: To maintain the searing and grilling performance of your
Cooking Grids, regular care and maintenance Is required.
12. MOUNTING THE CONTROL KNOBS,
INSTALLING THE IGNITION BATTERY
Parts Required:
2 x Control Knob (#10)
1 x Battery (#I)
Installation:
• Mount each Control Knob to the valve stems on the front panel of the
unit.
• Next, turn the ignition button cap counter-clockwise to remove it.
Insert the Battery into the housing with the positive (+) terminal
facing outward. Screw the ignition button cap back into place to cover.

13. SECURING THE REGULATOR HOSE

Parts Required:
1 x Screw (#C)
1 x Regulator Hose Retainer (#H)
Installation:
• Attach the Regulator Hose Retainer to the regulator hose, then secure
to the Front-Right Support Leg using one screw.
IMPORTANT: Take care to avoid pinching or damaging the regulator
hosing during installation. This could result in gas leaks once a gas
cylinder is installed.

14. PLACING THE GREASE BUCKET

Parts Required:
1 x Grease Bucket (#19)
Installation:
• Place the Grease Bucket on the spout hook on the underside of the
Main Barrel. Ensure it is level to avoid grease spills.
• The unit is now completely assembled.
12
11
2
12
10
10
13
C
H
14
19
1
2
I