Installing The Cooking Components; Mounting The Power Cord Bracket; Attaching The Grease Cup - Pit Boss 10697 Assembly And Operation Manual

4. INSTALLING THE COOKING COMPONENTS

Parts Required:
1 x Upper Cooking Rack (#1)
1 x Cooking Grid (#2)
Installation:
• Place the Cooking Grid on the ledge inside the Main Grill.
• Position the Upper Cooking Rack onto the Cooking Grid. The Upper
Cooking Rack can be placed as desired.
NOTE: To maintain the searing and grilling performance of your
cooking grids, regular care and maintenance Is required.

5. MOUNTING THE POWER CORD BRACKET

Parts Required:
1 x Power Cord Bracket (#6)
Installation:
• Remove the two pre-installed screws from the back panel of the unit.
Secure the Power Cord Bracket to the corner by using the two screws
previously removed.

6. ATTACHING THE GREASE CUP

Parts Required:
1 x Grease Cup (#8)
Installation:
• Place the Grease Cup on the two screws of the pre-mounted screws of
the Main Barrel side panel. Press down firmly to ensure it is level on
the screws to avoid grease spills.
• The unit is now completely assembled.
4
1
2
5
6
6
8
9