Wood Pellet Grilling; Understanding The Control Board - Pit Boss Mile Hybrid Assembly & Operation

Wood pellet & gas combo grill

Hide thumbs

Table Of Contents

Table of Contents

UNDERSTANDING THE CONTROL BOARD

CONTROL

DESCRIPTION

Press the Power Button to power on the unit. The button will glow blue if connected to a power source.

Press and hold the button for two seconds to turn the unit off.

The Controller Knob is used to select a cooking mode. Rotate the Controller Knob to set the grill in 5 different

modes available:

• GAS - This mode is selected when only the gas components of the grill are in use. This mode will deactivate

all wood pellet components from starting or running, but the actual cook temperature (ACTUAL) will still

be displayed.

• COMBO - This mode is selected when both the gas and wood pellet components are in use.

• PELLET - This mode is selected when only the wood pellet components are in use. All gas valves must be

off/closed in this mode. Choose from the three temperature presets: LO (107°C / 225°F), MED (135°C /

275°F), or HIGH (176°C / 350°F). When a pellet cooking mode is selected, the COOK mode will change on

the LCD screen.

The "P" Set Button is used to select one of the eight fine tunings when the Controller Knob is set to the

SMOKE Setting. Press the button to change the "P" setting to accommodate to your cooking style and

cooking environment, as preferred. With a short push of the button, the setting increases from P0 to P7,

then repeats. Adjustments are only possible in the SMOKE Setting. Factory default setting is "P4". If the "P"

setting is adjusted, your preference will be locked-in (saved) until further adjustment is made.

The "P" Set Button is also used as a Temperature Switch Control to change the temperature readout on

the LCD Screen. Press and hold the button for two seconds to switch to Celsius (ºC) or to Fahrenheit (ºF), as

preferred. Default is set to Fahrenheit.

The LCD Screen is used as the information center for your unit. The LCD screen will display your "P" setting,

"P" SET

actual cook temperature (ACTUAL), and the Meat Probe temperatures (PROBE1, PROBE2). If only one Meat

Probe is connected, only one reading will be displayed.

PROBE 1

PROBE 2

Press and hold the Prime Button to activate an extra feed of pellets to the Burn Pot. This can be used to

add more fuel to the fire before opening the barrel lid, resulting in a quick heat recovery time. It can also be

PRIME

used while smoking, to increase the intensity of clean smoke flavor. Requested from competition cookers.

The plug-in connection port(s) on the front of the Control Board are for a Meat Probe(s). When a Meat Probe

is connected, the temperature is displayed on the LCD Screen. When not in use, disconnect the Meat Probe

from the connection port. Compatible with Pit Boss® branded Meat Probes only. Additional Meat Probe(s)

sold separately.