Kramer VP-427X1 User Manual page 58

Function Description
IMAGE- Set the image size.
PROP
Sets the image
properties of the
selected scaler.
IMAGE-
Get the image size.
PROP?
Gets the image
properties of the
selected scaler.
MODEL? Get device model.
This command
identifies equipment
connected to VP-427X1
and notifies of identity
changes to the
connected equipment.
The Matrix saves this
data in memory to
answer REMOTE-INFO
requests.
MUTE Set audio mute.
MUTE?
Get audio mute.
NAME
Set machine (DNS)
name.
The machine name
is not the same as the
model name. The
machine name is used
to identify a specific
machine or a network in
use (with DNS feature
on).
NAME?
Get machine (DNS)
name.
The machine name
is not the same as the
model name. The
machine name is used
to identify a specific
machine or a network in
use (with DNS feature
on).
NAME-RST Reset machine (DNS)
name to factory default.
Factory default of
machine (DNS) name is
"KRAMER_" + 4 last
digits of device serial
number.
VP-427X1 – Protocol 3000
Syntax
COMMAND
#IMAGE-PROPscaler_id<CR>
FEEDBACK
~nn@IMAGE-PROPscaler_id,video_mode...<CR><LF>
COMMAND
#IMAGE-PROP?scaler_id<CR>
FEEDBACK
~nn@IMAGE-PROPscaler_id,video_mode...<CR><LF>
COMMAND
#MODEL?<CR>
FEEDBACK
~nn@MODELmodel_name<CR><LF>
COMMAND
#MUTEout_index,mute_mode<CR>
FEEDBACK
~nn@MUTEout_index,mute_mode<CR><LF>
COMMAND
#MUTE?out_index<CR>
FEEDBACK
~nn@MUTEout_index,mute_mode<CR><LF>
COMMAND
#NAMEmachine_name<CR>
FEEDBACK
~nn@NAMEmachine_name<CR><LF>
COMMAND
#NAME?<CR>
FEEDBACK
~nn@NAMEmachine_name<CR><LF>
COMMAND
#NAME-RST<CR>
FEEDBACK
~nn@NAME-RSTok<CR><LF>
Kramer Electronics Ltd.
Parameters/Attributes
– Scaler number – 1
scaler_id
– Status
video_mode
0 – Over scan
1 – Full
2 – Best fit
3 – Pan scan
4 – Letter box
5 – Under 2
6 – Under 1
7 – Follow in
– Scaler number – 1
scaler_id
video_mode – Status
0 – Over scan
1 – Full
2 – Best fit
3 – Pan scan
4 – Letter box
5 – Under 2
6 – Under 1
7 – Follow in
– String of up to 19
model_name
printable ASCII chars
– 1
out_index
– On/Off
mute_mode
0 – Off
1 – On
out_index – 1
– On/Off
mute_mode
0 – Off
1 – On
machine_name – String of up to 15
alpha-numeric chars (can include
hyphen, not at the beginning or end)
– String of up to 15
machine_name
alpha-numeric chars (can include
hyphen, not at the beginning or end)
Example
Set the image size to Full:
#IMAGE-PROP1,1<CR>
Get the image size:
#IMAGE-PROP?1<CR>
Get the device model:
#MODEL?<CR>
Set output to mute:
#MUTE1,1<CR>
Get mute status of output:
#MUTE1?<CR>
Set the DNS name of the
device to room-442:
#NAMEroom-442<CR>
Get the DNS name of the
device:
#NAME?<CR>
Reset the machine name
(S/N last digits are 0102):
#NAME-
RSTkramer_0102<CR>
56