Table of Contents
Advertisement
Setting OSD Parameters
VP-427X1
enables adjusting OSD parameters for your convenience via the OSD MENU
buttons.
To set the OSD parameters:
1. On the front panel press MENU. The menu appears.
2. Click OSD and define the OSD parameters according to the information in the following
table:
Menu Item
H-Position
V-Position
Timer
Transparency
Display
OSD parameters are set.
Managing EDID via OSD
VP-427X1
enables managing the EDID via the OSD MENU buttons.
Uploading the EDID
To upload EDID:
1. On the front panel press MENU. The menu appears.
2. Click EDID Manage and select the parameters according to the information in the
following table:
Menu Item
EDID on HDBT
EDID on HDMI
The selected EDID is sent to the input.
VP-427X1 – Operating and Controlling VP-427X1
Function
Set the horizontal position of the OSD.
Set the vertical position of the OSD.
Set the timeout period to Off or up to 60 seconds (default 10).
Set the OSD background between 100 (transparent) and 0 (opaque).
Select the information displayed on-screen during operation:
Info (default) – the information appears for 10 seconds.
On – the information appears constantly.
Off – the information does not appear.
Function
Select one of the following EDID sources and then press enter:
• A built-in EDID file: Def. 1080P, Def.1080P (AUD), Def. 4K
(3G), Def. 4K (3G - AUD).
• The HDMI Output.
• An external file (see
on page 14).
Select one of the EDID sources and then press enter:
• A built-in EDID file: Def. 1080P, Def.1080P (AUD), Def. 4K
(3G), Def. 4K (3G - AUD), Def. 4K (6G), Def. 4K (6G - AUD)
• The HDMI Output.
• An external file (see
on page 14).
Uploading EDID from an External File
Uploading EDID from an External File
Kramer Electronics Ltd.
13
Advertisement
Table of Contents
