Table of Contents
Advertisement
3. Highlight the network adapter you want to use to connect to the device and click Change
settings of this connection.
The Local Area Connection Properties window for the selected network adapter appears
as shown in
4. Highlight either Internet Protocol Version 6 (TCP/IPv6) or Internet Protocol Version 4
(TCP/IPv4) depending on the requirements of your IT system.
5. Click Properties.
The Internet Protocol Properties window relevant to your IT system appears as shown in
Figure 7
or
Figure
VP-427X1 – Operating and Controlling VP-427X1
Figure
6.
Figure 6: Local Area Connection Properties Window
8.
Figure 7: Internet Protocol Version 4 Properties Window
Kramer Electronics Ltd.
19
Advertisement
Table of Contents
