Table of Contents
Advertisement
3. If required, enter a new name, and click the save icon to change the name of the input
that appears in the web pages.
4. Click ON/OFF to enable/disable the HDCP decryption on the selected input.
If HDCP is disabled on an input, an HDCP encrypted source will not pass through the unit.
Inputs are configured.
Selecting an Input
To select an input to be switched to the output using the web pages:
1. Click Input Select on the Navigation List.
The Input Select page appears
2. In the Video Switching area, click the required input button.
The input button turns green
The selected input is switched to the output.
Freezing or Blanking the Video Output Signal
To freeze or clear the video output, do one of the following:
1. Click Input Select on the Navigation List.
The Input Select page appears
2. In the Video Switching area, click one of the following:
▪
– Freezes the currently displayed video frame.
To define what happens when you press the Freeze button,
see
▪
– Blanks the video output from the display; the display goes blank.
Output video signal is frozen/blanked.
Adjusting the Output Volume
The analog audio output volume can also be adjusted from the Audio web page.
To adjust the output volume:
1. Click Input Select on the Navigation List.
The Input Select page appears
2. Use the slider controls in the Volume area of the web page to change the volume or
enter the value in the text box above the slider.
3. Click
to mute the output.
Audio output volume is adjusted.
VP-427X1 – Using Embedded Web Pages
(Figure
(Figure
Defining FREEZE Button Operation Mode
(Figure
10).
10).
on page 16.
10).
Kramer Electronics Ltd.
25
Advertisement
Table of Contents
