Table of Contents
Advertisement
6. Select Use the following IP Address for static IP addressing and fill in the details as
shown in
Figure
For TCP/IPv4 you can use any IP address in the range 192.168.1.1 to 192.168.1.255
(excluding 192.168.1.39) that is provided by your IT department.
7. Click OK.
8. Click Close.
Connecting Ethernet Port via a Network Hub or Switch
You can connect the Ethernet port of
using a straight-through cable with RJ-45 connectors.
Configuring Ethernet Port
You can set the Ethernet parameters via the embedded Web pages.
VP-427X1 – Operating and Controlling VP-427X1
Figure 8: Internet Protocol Version 6 Properties Window
9.
Figure 9: Internet Protocol Properties Window
VP-427X1
to the Ethernet port on a network hub or
Kramer Electronics Ltd.
20
Advertisement
Table of Contents
