Figure 1: 602 Two-fiber Detachable Optical DVI Transmitter and Receiver Figure 2: The Auto EDID Button on the 602T Figure 3: Connecting the Fiber Optic Cables Figure 4: Connecting the 602T/602R Two-fiber Detachable Optical DVI Transmitter/Receiver 8 Tables Table 1: Technical Specifications of the 602T/602R...
Scan Converters and Scalers; GROUP 8: Cables and Connectors; GROUP 9: Room Connectivity; GROUP 10: Accessories and Rack Adapters; GROUP 11: Sierra Products 2 Digital Visual Interface 3 Download up-to-date Kramer user manuals from the Internet at http://www.kramerelectronics.com 4 The complete list of Kramer cables is on our Web site at http://www.kramerelectronics.com...
The 602T converts electrical signals to optical signals and the 602R decodes the optical signals back to electrical signals. The 602T can read the EDID , of the display device, and once it is connected to the computer, it provides this...
3.1 Powering the 602T and the 602R Your 602T/602R pair comes with two 5V DC power adapters. The 602R must always be powered via the external power adapter. The 602T can be powered via the external power adapter or it can derive its power via the computer’s 5V pin on the DVI card.
Section 5 5.1 The Display Device EDID The 602T and 602R are connected via two channels that transmit R, G, B and clock signals. The EDID of the display device is captured onto the transmitter for the computer to read.
If your display has this resolution, you do not need to capture the EDID. You can capture the EDID of the display device on the 602T so that when the computer connects to the 602T, it will read the virtual EDID information and identify the display device.
EDID Button Figure 2: The Auto EDID Button on the 602T 5.2 Connecting the Detachable Optical DVI Transmitter/Receiver To connect the 602T Two-fiber Detachable Optical DVI Transmitter with the 602R Two-fiber Detachable Optical DVI Receiver, as the example in Figure 4 illustrates, do the following: 1.
7. If the transmitter does not power up, connect the 5V power adapter to the 602T transmitter, and connect the adapter to the mains electricity. Figure 4: Connecting the 602T/602R Two-fiber Detachable Optical DVI Transmitter/Receiver 5.3 Avoiding Pitfalls using the 602T and 602R...
Technical Specifications Table 1 includes the technical specifications: Table 1: Technical Specifications of the 602T/602R INPUTS: DVI IN (602T), 2 LC optical connectors (602R) OUTPUTS: 2 LC optical connectors (602T), DVI OUT (602R) RESOLUTION: Up to WUXGA @60Hz (1.65Gbps) POWER SOURCE: 5V DC, <500mA...
Page 12
EXCLUSION OF DAMAGES The liability of Kramer for any effective products is limited to the repair or replacement of the product at our option. Kramer shall not be liable for: 1. Damage to other property caused by defects in this product, damages based upon inconvenience, loss of use of the product, loss of time, commercial loss;...
Page 13
For the latest information on our products and a list of Kramer distributors, visit our Web site: www.kramerelectronics.com, where updates to this user manual may be found. We welcome your questions, comments and feedback. Safety Warning: Disconnect the unit from the power supply before opening/servicing.