Wdmx (Wifly) Setup - ADJ VIZI CMY300 User Manual

S Y S T E M M E N U
ERROR LOGS
Fixture Errors - Displays log of recent errors.
Reset Error Log - Clear and reset error log by selecting "Yes." Passcode = 050. Select "No" to return
to the previous menu without making any changes.
RESET FUNCTIONS
Pan & Tilt - With this function, you can reset the pan & tilt motors.
1. Access the main menu, and press the UP or DOWN buttons so that "Reset Functions" is highlighted,
then press ENTER.
2. Press the UP or DOWN buttons until "Pan & Tilt" is displayed, and press ENTER.
3. Use the UP or DOWN buttons to switch between "No" or "Yes". To reset the pan & tilt motors, select
"Yes" and press ENTER.
Effect - With this function, you can reset the effect motors.
1. Access the main menu, and press the UP or DOWN buttons so that "Reset Functions" is highlighted,
then press ENTER.
2. Press the UP or DOWN buttons until "Effects" is displayed, and press ENTER.
3. Use the UP or DOWN buttons to switch between "No" or "Yes". To reset the effects motors, select
"Yes" and press ENTER.
All - With this function, you can reset all of the motors.
1. Access the main menu, and press the UP or DOWN buttons so that "Reset Functions" is highlighted,
then press ENTER.
2. Press the UP or DOWN buttons until "All" is displayed, and press ENTER.
3. Use the UP or DOWN buttons to switch between "No" or "Yes". To reset all of the motors, select
"Yes" and press ENTER.
SPECIAL FUNCTIONS
Factory Setting - Within this menu, you can reset the fixture to factory settings.
1. Access the main menu, and press the UP or DOWN buttons so that "Special Functions" is
highlighted, then press ENTER.
2. "Factory Setting" will now be displayed, and press ENTER.
3. To reset the fixture to factory settings, use the UP or DOWN buttons to "Yes" and press ENTER. If
you do not wish to reset to factory settings, highlight "No" and press ENTER.
W D M X ( W I F LY ) S E T U P
With this feature you are able to control the unit with DMX without the need of XLR cables. Your DMX
controller must be connected to a ADJ WiFly TransCeiver or have WiFly wireless DMX remote to use
this function. You are able to communicate up to 2500 feet/760 meters (open line of sight).
1. Follow the instructions on page 30 to activate WiFly and set the Wireless address. The address
must match the address set on the WiFly Transceiver.
2. After you have set the WiFly address, follow the DMX instructions to select your desired DMX
Channel mode and set your DMX address.
3. Apply power to the ADJ WiFly Transceiver. The fixture must be set up first before you apply power
to WiFly Transceiver.
Note: If the sync does not work, switch the WiFly power off then on again.
25