Source Connections; Input Locations - Barco BARCOREALITY 908 Installation Manual

6. SOURCE CONNECTIONS

Overview
•

Input Locations

• Composite Video Source to Port 1
• S-Video or Video Source to Port 2
• RGB Analog Source to Port 3
• RGB Analog Source with Composite Sync to Port 4/5
• Component Video Source to Port 4/5
• RGB Analog Source with Tri Level Sync to Port 4/5 (Optional)
• Component Video Source with Tri Level Sync to Port 4/5 (Optional)
• RS232 Connection
• Communication Port for Communication With Peripherals
6.1 Input Locations
Input Facilities
• Composite Video
1
• S-Video
• RGBS or RG B
S
• RGB3S or RG
3S
• (R-Y)Y(B-Y)S or (R-Y)Y
• (R-Y)Y(B-Y)3S or (R-Y)Y
Image 6-1
Input Facilities
Which source to which input
This table gives an overview of the relation between Input Port #, Source Type and Selection Keys on the RCU:
Input Port #
1
2
3
4/5
4/5
1. Only available when the Optional Decoder + Limo Pro (R9828631) is installed.
2. Input signal Y/C (luma/ chroma)
3. Video or S-Video : switchable in the picture tuning menu.
4. Input signal : R, G and B with automatic sync detection between seperate sync (separate composite sync or with separate hor and vert. sync) or sync on green (composite sync).
5. Input signal : R-Y, Y and B-Y with separate composite sync or with separate hor and vert. sync or with composite sync on Y.
R5976354 BARCOREALITY 908 SPLIT PACK 10092002
1
B
(B-Y) [Component Input]
S
(B-Y) [Component Input]
3S
Source Type
Composite video
2
S-video ./Composite video
4
RGB
4
RGB
5
Component video
3
6. Source Connections
Selection Keys on the RCU
1
2
3
4 or 5
6
35