ITT PumpSmart PS220 Configuration And Operation Manual page 102

PS220 Configuration & Operation Guide
8.1.1 Analog Input Configuration Wizard.
To configure an Analog Input or Output, from the Home Screen follow the path: Menu>PS220 Configuration>I/O Con-
figuration>No)>Analog I/O.
OR "Yes" if you are configuring the FIO-11optional Extension Module for the first time. If the Extension
model is included, then wait until it loads software. This message and the loading of the software will
only occur during the initial configuration of the addition of the extension module.
The steps that you will perform for each Analog Input:
1. Choose the AI that you wish to configure.
2. Configure the Function/name for the Input.
3. Configure the sourcing units input value for the AI mA or Vdc.
4. Configure the Value in mA/Vdc for the Min value.
5. Configure the Value in mA/Vdc for the max value.
6. Configure the Scaled Min value for the AI.
7. Configure the Scaled Max value for the AI.
8. Exit Wizard
101 PS220
1. "No"
2. "Select"
1. "Select"