Smartflow Basic - ITT PumpSmart PS220 Configuration And Operation Manual

PS220 Configuration & Operation Guide
Smartflow
Basic SmartFlow
The PumpSmart PS220 utilizes a complex algorithm that will calculate the actual flow of the pump. External sensors are
not required with Basic SmartFlow. Any manufacturers pump will work with Smartflow.
Basic SmartFlow is designed for low to medium specific speed pumps, under 3000NS. A pump with a specific speed under
3000 will have the following characteristics.
1. Power rises as flow increases with no "dips or bumps" in the power curve.
2. The power value at shut off is at least 20% less than the power at BEP (Best Efficiency Point).
209 PS220