Specification For Main Circuit Terminals And Control Terminals; Control Terminal; Power Terminal; Chapter 2 Installation And Wiring - Delta Electronics AC Motor Drive VFD-G User Manual

Chapter 2 Installation and Wiring|

2.5 Specification for main circuit terminals and control terminals

7.5 HP to 20 HP (VFD055F43B-G, VFD075F43B-G, VFD110F43A-G, VFD150F43A-G)

Control Terminal

Torque: 4Kgf-cm (3 in-lbf)
Wire: 12-24 AWG

Power Terminal

Torque: 30Kgf-cm (26 in-lbf)
Wire: 12-8 AWG
Wire Type: Stranded copper only, 75° C
NOTE: If wiring of the terminal utilizes the wire with a 6AWG-diameter, it is thus necessary to
use the Recognized Ring Terminal to conduct a proper wiring.
2-14
POWER IM MOTOR
3
Revision July 2008, EG03, SW V1.06