250 Hp To 300 Hp - Delta Electronics AC Motor Drive VFD-G User Manual

250 HP to 300 HP (VFD1850F43A-G, VFD2200F43A-G)
Control Terminal
Torque: 4Kgf-cm (3 in-lbf)
Wire: 12-24 AWG
Power Terminal
Torque: 408kgf-cm (354 in-lbf)
Wire: 500 MCM (max)
Wire Type: Stranded copper only, 75°C
Revision July 2008, EG03, SW V1.06
-
+
R/L1 S/L2 T/L3 U/T1 V/T2
( ) ( ) -
POWER DC + DC
NOTE: It needs following additional terminal when
wiring, and add insulation sheath on position
where following figure shows.
Chapter 2 Installation and Wiring|
W/T3
2-19