Table of Contents
Advertisement
B.6 PU06
B.6.1 Description of the Digital Keypad VFD-PU06
Frequency Command
Status indicator
Output Frequency
Status indicator
User Defined Units
Status indicator
JOG
By pressing JOG key,
Jog frequency operation.
UP and DOWN Key
Set the parameter number
and changes the numerical
data, such as Master Frequency.
Left Key
Move cursor to the left.
FWD/REV Key
Select FWD/REV operation.
B.6.2 Explanation of Display Message
Display Message
Revision July 2008, EG03, SW V1.06
F
H
U
JOG
RUN
The AC motor drive Master Frequency Command.
The Actual Operation Frequency present at terminals U, V, and W.
The custom unit (u)
The output current present at terminals U, V, and W.
Press
to change the mode to READ. Press PROG/DATA for about
2 sec or until it's flashing, read the parameters of AC drive to the digital
keypad PU06. It can read 4 groups of parameters to PU06. (read 0 –
read 3)
Press
to change the mode to SAVE. Press PROG/DATA for about
2 sec or until it's flashing, then write the parameters from the digital
keypad PU06 to AC drive. If it has saved, it will show the type of AC
motor drive.
The specified parameter setting.
Appendix B Accessories|
LED Display
Indicates frequency, voltage, current, user
defined units, read, and save, etc.
Model Number
VFD-PU06
Status Display
Display the driver's current status.
EXT PU
MODE
Change between different display mode.
PU
Right key
Move the cursor to the right
STOP
STOP/RESET
Stops AC drive operation and reset the drive
RESET
after fault occurred.
RUN Key
Start AC drive operation.
Descriptions
B-11
Advertisement
Table of Contents
