Receiving And Inspection; Nameplate Information; Model Explanation; Chapter 1 Introduction - Delta Electronics AC Motor Drive VFD-G User Manual

1.1 Receiving and Inspection

This VFD-G AC motor drive has gone through rigorous quality control tests at the factory before
shipment. After receiving the AC motor drive, please check for the following:
Check to make sure that the package includes an AC motor drive, the User Manual/Quick Start
and CD, dust covers and rubber bushings.
Inspect the unit to assure it was not damaged during shipment.
Make sure that the part number indicated on the nameplate corresponds with the part number of
your order.

1.1.1 Nameplate Information

Example for 10HP/7.5kW 3-phase 460V AC drive
Output Frequency Range

1.1.2 Model Explanation

Revision July 2008, EG03, SW V1.06
AC Drive Model
Input Spec.
Output Spec.
Enclosure type
Bar Code
Serial Number
43
VFD 075
F
Series
Name
055:7.5HP(5.5kW)
150:20HP(15kW)
300:40HP(30kW)
550:75HP(55kW)
1100:150HP(110kW)
1850:250HP(185kW)

Chapter 1 Introduction

MODE : VFD075F43A-G
INPUT : 3PH 380-480V 50/60Hz 19.0A
OUTPUT : 3PH 0-480V 18A 14kVA 10HP
Freq. Range : 0.1~120.00Hz
ENCLOSURE: TYPE 1
075F43AG4T5010001
A G -
VFD-G series
Version Type
Input Voltage
43:Three phase 460V
Applicable motor capacity
075:10HP(7.5kW)
185:25HP(18.5kW)
370:50HP(37kW)
750:100HP(75kW)
1320:175HP(132kW) 1600:215HP(160kW)
2200:300HP(220kW)
110:15HP(11kW)
220:30HP(22kW)
450:60HP(45kW)
900:125HP(90kW)
1-1