Rtms Automatic Speed Calibration - Image Sensing Systems RTMS G4 User Manual

G4 Software

RTMS Automatic Speed Calibration

The speed calibration process sets the internal speed coefficients used to calculate the average
speed of traffic in each zone. The calibration procedure used depends on traffic conditions.
When setting up relocated units at their new locations, all
speed coefficients should be first reset to their default values
Note
using the Manual Speed Calibration window.
Options are:
•
Manual. Displays manual calibration options.
•
Start. Starts the calibration process.
•
Pause. Pauses the calibration process.
•
Exit. Returns to the main screen.
3-62 © 2009 ISS Canada
Chapter 3
G4 User Manual