How To Configure Common Settings - Image Sensing Systems RTMS G4 User Manual

Chapter 3

How to Configure Common Settings

Setup Parameters are often common to all sensors. For example, the sensors in a mid-block
deployment or string of detection stations along the same highway. To save the installer time
and effort in repeatedly entering the same parameters in each site, a group of settings is defined
as common settings. Common settings allow you to specify the basic parameters for an entire
group of sensors
1. Start the WinRTMS software.
2. Select Common Settings from the listed options.
3. The common settings screen appears:
4. Check the boxes on the sides of the displayed parameters to define which parameters are
defined as common settings.
5. Click Load to send the common parameters to the RTMS sensor.
6. Click Exit to return to the main screen.
G4 User Manual © 2009 ISS Canada
G4 Software
3-31