Structual Changes; Responsibility Of The Operator - Wacker Neuson BS Series Operator's Manual

Safety

4.3 Structual changes

4.3 Structual changes
4.4

Responsibility of the operator

12
Structural modifications may not be made without the written consent of
the manufacturer. Unauthorized structural changes may result in hazards
to the operator and/or third parties as well as damage to the machine.
The manufacturer's liability and warranty are also void in the event of
unauthorized structural alterations.
In particular, a structural change shall be deemed to have occurred:
• When opening of the machine and permanent removal of
components.
• Installation of spare parts that do not come from the manufacturer or
are not equivalent in design and quality to the original parts.
• Attachment of accessories of any kind that do not originate from the
manufacturer.
Spare parts or accessories from the manufacturer can be installed or
removed safely. Further information is available on the Internet at -
www.wackerneuson.com.
The operator is the person who operates this machine himself for
commercial or economic purposes or who leaves it to a third party for
use/application and bears the legal product responsibility for the
protection of personnel or third parties during operation.
The operator must make the operator's manual accessible to the
personnel at all times and ensure that the operator has read and
understood the operator's manual.
The operator's manual must be kept ready to hand at the machine or at
the place of use.
The operator must hand over the operator to any other operator or
subsequent owner of the machine.
The country-specific regulations, standards and directives on accident
prevention and environmental protection must also be observed. The
operator's manual must be supplemented by further instructions for
compliance with operational, official, national or generally applicable
safety guidelines.
Operator's Manual | BS | 5100061347 | 03/2021 | [au]
http://