Safety - Mcube CUBEscan BioCon-500 User Manual

2.4

Safety

This guide covers components, function, maintenance, storage, and precautions
needed to use this system. All users must read and thoroughly understand this
entire guide prior to using the BioCon-500
use of the BioCon-500
Compatibility), Equipment Safety).
WARNING:
2.4.1 Electrical Safety
This device meets IEC 60601-1, ClassⅠ, Type BF isolated patient-applied parts
safety requirements. This device complies with the applicable medical equipment
requirements published in the Canadian Standards Association (CSA), European
Harmonized Standards, and Underwriters Laboratories(UL) safety standards.
Please review and follow the following safety warnings.
WARNING:
TM
(Electrical Safety, Battery Safety, EMC (Electromagnetic
Risk of explosion:
To avoid the risk of injury, do not operate the device in the
presence of flammable gasses or anesthetics. The hazard
of potential explosion exists.
The power supply should be properly grounded. The power
supply must be connected to an AC socket that is medical
grade or equivalent.
removed or tampered with.
Do not use the device if the power cord is damaged.
Do not open the device's enclosures. All servicing, except
battery and printer paper replacement, must be made by a
qualified technician.
Inspect the transducer and cable prior to using the device.
Do not use if the transducer or cable is damaged.
Use the device within operating conditions specified in
chapter 10 "Environmental conditions."
Do not use the device with any defibrillator at the same
time.
Use accessories only recommended by Mcube Technology.
Do not use if the transducer that has been immersed
beyond the specified cleaning or disinfection level.
3
TM
. This section has information on safe
The grounding pin must not be