Measuring Urine Volume - Mcube CUBEscan BioCon-500 User Manual

5.3

Measuring Urine Volume

1) Charge Battery.
Charge the battery by connecting the AC Adapter to the AC main and to the
console.
2) Turn on the system
Turn the system on by pressing and holding POWER switch for more than 1
second.
Then you can see the Top Screen as follows.
3) Select patient type.
Select patient type by pressing LEFT switch (SEX option) on Top Screen.
Each time a user presses the LEFT switch, the patient type mark will be changed.
: A male patient
4) Apply the ultrasound gel
Apply the ultrasound gel on the patient's abdomen, above about 3~4cm above
pubic symphysis.
5) Aim toward bladder
Put the ultrasound probe on gel applied to the patient's abdomen and aim at the
location the bladder is expected to be in.
Fig 8 Top Screen
43
: A female patient