Setting Up Cubescanpc - Mcube CUBEscan BioCon-500 User Manual

6.8

Setting up CubeScanPC

This is used to change the CubeScanPC's software settings. The only available
function is to input the Facility Name.
6.8.1 Facility Name
1) Click Setup in the menu bar.
2) Select CubeScanPC Setup.
3) CubeScanPC Setup Dialog is displayed. Enter the desired facility name.
4) Click OK.
* "Handshake Mode" does not have any effect on the operation of the
CubeScanPC Software currently.
IMPORTANT: Facility name used here is independent of the one in
Device Configuration menu and is only used for printing
purposes. Facility name in Device Configuration is saved in
TM
the BioCon-500 and not impacted by this option.
81