Customizing Other Setup Options - Mcube CUBEscan BioCon-500 User Manual

5.8

Customizing Other Setup Options

1) Press UP (SETUP option) on the Top Screen.
2) Move the position cursor using UP (MUP option) or DOWN (MDOWN
option) to select the desired option.
3) Press ENTER (SELCT option).
The position cursor will move to the right of the selected item.
4) Browse the options by using LEFT (OUP option) or RIGHT (ODOWN
option)
Context Menus
5) Select setup item option ENTER
Then the selection cursor moves to the left hand side of the Setup screen
Position Cursor
In Setup Screen
Clinic Name
Set Date/Time
Print Option
Flash Store
Setup Print
Scan Result
Auto Power
Calibration
Prescan Enable
Exit
OUP-← ODOWN-→
Fig 19 Setup Item Option Screen
55
MCUBETECH
2007/10/10 15:00
Raw Image
On
B-Mode
7 minutes
Return
On
ENTER-E
(ENTER option).
Setup Item
Opion