Setup; Installing Or Removing The Battery - Mcube CUBEscan BioCon-500 User Manual

4 SETUP

4.1

Installing or Removing the Battery

The battery is installed in a bay in the BioCon-500
or removing the battery for storage, follow these instructions.
Power off
Disconnect accessories
WARNING:
1) Turn the system off.
2) Disconnect all connections from the console.
3) Loosen the two screws using a screwdriver.
4) Remove the battery cover.
IMPORTANT: When removing the battery
cover, be careful to not bend the cover.
5) Pull out the battery using the strap on the
battery.
6) Insert the new battery. When inserting, the top
side of the battery (the side having LED) should
be down (facing the bottom of the unit) and the
strap on the battery should be be facing
outwards.
installed if the orientation is incorrect.
To avoid the risk of explosion, only use batteries
22
TM
. When changing the battery
The battery cannot be properly