The Optional Software(Cubescanpc); General Information - Mcube CUBEscan BioCon-500 User Manual

6 THE OPTIONAL SOFTWARE(CubeScanPC)

Skip this part if you do not have or use the optional CubeScanPC software.
6.1

General Information

Copyright ⓒ 2007 Mcube Technology Co., Ltd. All rights reserved.
The contents of this manual are the property of Mcube Technology Co., Ltd. Any
reproduction in whole or in part is strictly prohibited.
This manual correctly describes the software and its functions at the time of
publishing of the CD-ROM. However, as modifications may have been carried out
since the production of this manual, the device package may contain one or more
addenda to the manual. This manual including any such addenda must be read,
before using the software.
The following situations void any guarantee(s) and obligations of Mcube
Technology:
- The software is not used according to the enclosed manuals and other
accompanying documentation.
- The software is installed or modified by persons other than Mcube Technology
certified service technicians
** "SETTING UP The BioCon-500
engineers and technicians.
This User Guide covers the basics of installing CubeScanPC software and using
the upload function between the BioCon-500
The following information is covered in this manual.
• Warning statements.
• Intended use.
• PC requirements.
• Installation
• Operation
• Technical data
TM
" function is only available to service
TM
and a PC.
66