LifeFitness CLUB Series Assembly Instructions Manual page 5

FIGURE 2
12 3/8 X 2-1/2"
19
STEP 2:
• LOOSELY assemble the CROSS BRACE (5) to the TOWER (1) and the BOOM ASSEMBLY (4) using seven RH CAPS (41), three
3/8 X 2-3/4" BOLTS (13), one 3/8 X 2-1/2" BOLT (12), seven 3/8" SAE WASHERS (21), seven 3/8" RH WASHERS (22) and
three 3/8" LOW HEIGHT LOCK NUTS (19) as shown in FIGURE 2.
• Securely tighten all loose frame connections made to this point and sanp on all RH CAPS (28,41)
and RH WASHERS (22).
1A
1
21
22
4A
4C
4E
5
41
13 3/8 X 2-3/4"
4B
4D
5
4
13 3/8 X 2-3/4"