Table of Contents
Advertisement
Preparing
Cot
Panels
The cot is surrounded by two side panels and two end
panels, which can be opened independently of each
other. The end panels have flexible hose seals.
Fitting the panels
1 Insert lower pins into the left- and right-hand guide
grooves.
Place the panels in an upward position.
2 Press the panel down firmly, until the pins lock into
position and lie in the grooves.
Tilt the panel into a vertical position, and drop it into
the locking position.
Fit all four panels.
Make sure the panels are seated correctly!
To open:
Lift the panel all the way up, until the upper pins leave
the guide groove, then fold down the panel.
Recommendation:
In order to prevent the patient from falling out when the
side panels are open, fit inner panels:
Insert pins in tapered holes and press down slightly
until the inner panel is firmly seated.
With lively children, the optional inner walls should
also be used even when the side panels are closed.
10
2
1
2
1
Advertisement
Table of Contents
