Rear Quarter Window Regulator Removal And Installation; Rear Quarter Window Sealing Strip Removal And Installation; Removal And Installation 45B - Cadillac 54-6219 1954 Shop Manual

3-31
2. Rennnve nine guidc as.semlnty front attachin;
sr.ruw ''A", at the lower face 0! the tack pillar,
Fig. 3-47.
S. Remove the upper attaching screw ''C'', at the
rear end at the guide aeeemhly, after first re-
nlaving the folding rep compartment Bloc: panel
weatherstrip assejnthly.
4, Remove the center attaching stud
nut and
washer,
5. I ennovc LI icgu ud
5
assembly fr oat lltc window
opening hetwes,t the recr quarter auter aim i',ner
nd ren.evc thc g'JicIe assembly frc,tnn the
BODY
panel sick of the regulator and reverse the re-
Innova I praccclure.
b. 6267
1. Retnave rca r quarter window. Sec Nate 4£.
2, l<einnovc iba rear quarter windc,w regulator
attaching scrc'we, ''D", and rennove the regulator
from tite bbay, werking through the access Lnole.
Fig. 3-47.
3. To !as:all, apply nnteduiunl_Lnedlcd seater around
the attaching holes on dne quarter itlulcr pallet side
af the regulator end reverse the removal prnce4uire..
44
Rear Quarter Window Sealing
Strip Removal and Installation
a. RemvoI
1. Lower rear ulutarter
vittdnw to fLull down
posttian cad rsmove the rear scat cushion, rear
ecat back and rear cuuarter iv: It finishiin molding.
2. Apply a strip uf masking tape along the rear
quarts tv inclaw upper reveal innalding to protect
the finish.
3. Remove tlte side roof rail mechanical sealing
outer weatherstrip, rear.
4.
:
eanavc' the scaling strip a tra c mi1t
Sc row a.
5. With a se-Itable tool, inscrted he'een front
end of sealing strip and roof rail, carefully pry
seating strip dow,tward.
b. To unstall. reverse the removal procedure.
7- To adjust guide. -See Nate 40a.
43 Rear Quarter Window Regulator
Removal and Installation
a. 6237
1. Retnnve rear quarter window as described
itt
Nate 41.
2. Discu,noect regulator motor cures ';:un cars Ca
equipped and remove regulator attac.hfng screwe
''A'', Fig. 38.
3. Re'n,nve the rear quarter window regulator
iacd motor assembly thraugh due acce.ss hoje in
tine tear quarter muter panel.
4. l'a install, apply nneditun-ljad:edsealet atnacd
the regulatar attaching holes on tite qucurter inner
6. When sealing strip flange Ia campletely dis..
engaged rrom reveal molding clips, carefully pu11
sea hag strip forward to remove fro-.,t hly.
7. Tu remove escutcheon, disengage sscutchtcon
flange fronn reveal 'niolding clips and rennnve from
lady.
b. Installation
Install sealing strip cscatci.ueOa to rttof rail
by
inserting
escotchean flange between reel
molding and clip.
Insert rear end nf sealing strip in between
rcsr quarter outer and Mner panel aind slide rcar
end aver retaittittg clip.
3. Align front c'und of sealing strip with rear
end of side roof rail mechanical sealtn, e trip.
Fig, 3-48 Reat Quarts WI ':1
aw Rgu
I
afar
Re
mayo
162371
4. Positiott sealing strip flange between reveal