Cadillac 54-6219 1954 Shop Manual page 30

3-12
BODY
6, On bodies equipped with powered tegolatots,
proceod as follows:
a. On fotir 4 doer styles, remove smaller load
ing hole covet. On two
1
door styles, remitove both
leading hole covers.
b. Reniove eae
2 screws securing electrical
conduit and slide condoit toward fto'tt body hinge
ptllar to expose wiring hantess.
c. Leoseo clips securing wiring harness to door
inner panel and disconnect motor lead wires ftem
tlte wiring harness. Then, carefully polL wirhmtg
harness from betweeti door panels through cutout
in doc,r hijige pillar.
7. With door properly sopported, remove door
attaehittg bolts securing upper and tower hinge to
front body hinge pillar or bolts securing door to
hinge straps, Pig, 3-17, depending on what tnctliod
or removal he being osed.
8. With aid ofhelger, remove door assembly from
body opening,
fig. 3-17 Etoni Door Hinge Remov&
Fig. 3-18 Bo4y 5hfr MainI Clear
ice-ftont