Change The Configuration; Pin Code; Reset Your Pin Code - Alcatel-Lucent OPENTOUCH ALE-500 User Manual

User Manual
Select this icon to return to the main menu.
If you leave the PIN code request menu when the phone is starting, the phone will start without VPN
activated.
If an error occurs when your phone is running in remote mode, a popup is displayed with an error
message. Please note this message to send to your administrator (see chapter: Contacting your
administrator).
3.1.3

Change the configuration

You have to change a parameter of the VPN configuration.
•
Access to the administration menu of the desk phone (see chapter below).
•
VPN (scroll down the menu).
•
Select a submenu to change the configuration
•
Enter your PIN code (If an administrator password is defined by the system, you can use it to
access to the VPN configuration by selecting:
•
Validate.
•
Change parameters.
•
Select this icon to save parameters.
•
The VPN configuration is saved and the main menu is displayed.
•
Select this icon to exit the configuration menu. The desk phone restarts.
•
Enter the PIN code if you have selected the option
•
Validate.
•
Your desk phone is ready for remote working.
If an error occurs when your phone is running in remote mode, a popup is displayed with an error
message. Please note this message to send to your administrator.
3.1.4

PIN code

The PIN code is composed of 4 digits. You can access the VPN configuration by entering the PIN code or
the administrator password if defined by the system. Depending on the VPN configuration, the PIN code
is requested when you boot your desk phone. We recommend you enable this option for security reasons
and if you need your phone in remote and in business place (See Reconnect your desk phone in your
business place).
If the PIN code is incorrect 5 times in succession, the PIN code and VPN parameters will be erased.
If no administrator password is defined by the system, the PIN code is required to access VPN
configuration.
Once the PIN code and the administrator password have been set, you can switch between the PIN code
and the administrator password by selecting the following softkeys in the login window:
Use PIN code.
3.1.5

Reset your PIN code

•
Access to the administration menu of the desk phone (see chapter below).
•
VPN (scroll down the menu).
•
VPN Pincod
•
Enter your PIN code.
•
Validate.
•
Set new Pincode: enter the new PIN Code.
•
Select this icon to save parameters.
•
The VPN configuration is saved and the main menu is displayed.
•
Select this icon to exit the configuration menu. The desk phone restarts.
•
Enter the PIN code if you have selected the option
8AL90399ENAAed01
(VPN Config, VPN Tftp, VPN Authent, VPN
Use Password).
(Request Pincode on
(Request Pincode on
Pincod).
Boot).
User password,
Boot).
55 /101