Find The Phone's Ip Address; Reset To Factory Settings; Registering Phone; Manual Configuration - Alcatel-Lucent M7 Configuration Manual

Make sure the Ethernet cable and router or switch is Power over Ethernet (PoE) compliant.

Find the Phone's IP Address

Find out your Alcatel phone's IP Address.
Press the OK button.
The IP address will be displayed on the top of display.

Reset to Factory Settings

This step is not required for brand new out-of-the-box phones, however, if the phone has been
already used, then it is a must.
Click Maintenance in the left-hand navigation menu.
Click the Reboot&Restore sub-section.
Click OK next to the 'Restore Factory' field to initiate action.
Wait for some time for a device to reset to factory settings.
NOTE:
Do not unplug or remove power from the phone while it is updating firmware and
configuration.

Registering Phone

This section describes how to identify the Alcatel phone model, requirements that must be met,
and how to register the phone using manual configuration or auto-provisioning.
The following topics are covered:

Manual Configuration

Auto Provisioning
Manual Configuration
This section describes how to set the UAD settings, create a PBXware Extension and register
the phone.
The following topics are covered:
UAD Settings
Creating an Extension
Registering a Phone
UAD Settings