Connectors; Description Of The Connectors; Plug In The Phone; Power Boost - Alcatel-Lucent OPENTOUCH ALE-500 User Manual

User Manual

1.14 Connectors

1.14.1 Description of the connectors

Universal Serial Bus (USB-C) connector
1
10/100/1000 Mbps Ethernet connectors to a PC (RJ45). Use this port to connect your PC to your enterprise
2
network.
10/100/1000 Mbps Ethernet connectors to the enterprise network (LAN - RJ45). Use this port to connect
3
the desk phone to the enterprise network.
Wired handset connector (RJ11)
4
SWB Corded Handset).
Universal Serial Bus (USB-C) connector
5
(1)
USB connectors (Universal Serial Bus) – USB type C.
These connectors are agnostic, meaning that you can use either connector to connect USB-C power
adapter, USB keyboard, USB headset, an audio equipment, a USB stick, a Bluetooth® USB dongle
provided with a Bluetooth® headset.This connector can be used to charge a smartphone.
USB-C USB type C

1.14.2 Plug in the phone

The phone can be powered either via a power adapter (sold separately) or via Power over Ethernet
(PoE). The power adapter can be connected to a USB-C connector (1 or 2).

1.14.3 Power boost

The Power boost feature allows a desk phone to get more power available from Power over Ethernet
(PoE) than requested through a default startup, for several needs such as more USB current for
accessories (smartphone charging). In this case, your administrator has to enable the USB Boost to
deliver more power. After restart, the phone changes its USB current limiter management, to increase
the available power from 240 mA to 1400 mA according to the model of your desk phone and can change
of PoE class.
Contact your administrator if necessary.

1.15 Audio encryption

Your desk phone supports telephony encryption. On a secured telephone network (IPTouch Security, SSM
box), voice and signaling are encrypted.
If the communication is encrypted, the following icon is displayed in the communication
screen. The call in progress icon is replaced by this icon.
In idle state, the following icon is displayed in the status bar to indicate that the signal is
encrypted (depending on the icon priority, see chapter:Status icons).
Your phone supports many audio and signal encryption types. The native encryption mode is defined in
the local administrator menu of the phone
or administrator.
8AL90399ENAAed01
(1)
.
. Use only Alcatel-Lucent Enterprise compatible handset (ALE-150
(1)
.
The USB Type C is reversible and full duplex. It is able to
transmit data or power.
(Native Encrypt). For more information, contact your installer
29 /101